8PT Low Voltage Switchgear Panel
SIVACON 8PT is a type-tested modular low voltage switchgear cabinet, rated up to 7400A. It supports fixed-mounted, plug-in and withdrawable designs, widely used in industrial plants, buildings and power distribution systems for power control and protection.
Featured๏ผ
- Type-tested low-voltage switchgear (TTA), complying with IEC 60439-1 standard.
- Modular structure with 25mm modular holes, flexible for expansion and combination.
- Horizontal busbar installed at cabinet top, rated current up to 7400A; rated peak withstand current up to 375kA.
- Multiple available structures: fixed-mounted, plug-in and withdrawable types.
- Independent compartmentalized design, separate compartment for each functional unit, improving operational safety.
- Finger-safe protection (IP20B), prevents accidental contact with live conductors.
- Multiple protection degree options: IP30, IP31, IP40, IP42, IP54.
- Flexible cable connection: cables can be routed and connected from top, bottom, front or rear side.
- Cabinet frame uses 2.5mm sheet steel, enclosure with 2.0mm sheet steel, sturdy mechanical structure.
- Optional power factor compensation cubicle to reduce power loss and cut electricity cost.
- With misoperation interlock protection for withdrawable units; replacement can be done without full cabinet power cut.
- Surface treatment optional: powder coating, spray painting or galvanizing.
SIVACON 8PT low voltage switchgear is a new-generation modular metal-enclosed power distribution cabinet, designed for industrial power supply and building power distribution projects. As [low voltage switchgear], it adopts fully type-tested TTA modules to guarantee safety and reliability.
The 8PT switchgear features a compartmentalized cabinet layout. Each functional unit is isolated in independent compartments, which limits internal arc fault impact and protects operators. The horizontal busbar system is mounted at the cabinet top, supporting rated current up to 7400A. Three-pole or four-pole busbar options are available to meet different power system requirements.
This [modular low voltage panel] offers three installation technologies: fixed-mounted (OFF), plug-in (OFPD/OFPM) and withdrawable (OFW).
- Fixed-mounted cubicles are economical for simple feeder circuits.
- Plug-in design enables quick replacement of feeder modules up to 630A.
- Withdrawable units have test/disconnected positions, modules can be replaced without cutting off the whole switchboard power supply.
Cable connection is highly flexible. Cables can be arranged from top or bottom, and connected from front or rear of cabinet. The cabinet frame is assembled from robust formed sheet steel sections, with optional surface treatments including powder coating and galvanizing. Protection grades from IP30 up to IP54 can be selected according to site environment.
The SIVACON 8PT can integrate [power factor compensation cubicle] for centralized reactive power compensation, lowering transformer loading and reducing energy consumption. It also supports 3W circuit breaker installation for incoming, outgoing and bus-coupler cubicles, with short-time selective protection up to 500ms.
The cabinet dimension is customizable: height 2200/2600mm, width 400/600/800/1000/1200mm, depth 600/800/1000/1200mm. It can be installed against wall or free-standing, suitable for main distribution board, sub-distribution board and motor control center in factories, commercial buildings, renewable energy stations and infrastructure projects.
All assemblies pass full factory inspection and type test according to IEC 60439-1. Pressure relief device and arc barrier are equipped inside cabinet to limit internal arc hazard, ensuring long service life and high operational stability.
